All of the sizes listed are sold by the metre, and come in lengths ranging typically from 2.4m up to 5.1m, but if all you need is a foot, that's all you will pay for. We can cut to size at no extra cost while you wait. Sizes kept in stock are :-
1" x 2" 1" x 3" 1" x 4" 1" x 5" 1" x 6"
1" x 7" 1" x 8"
1 1/2" x 1 1/2" 1 1/2" x 2"
1 1/2" x 3" 1 1/2" x 6"
1 1/2" x 9"
2" x 2" 2" x 3" 2" x 4" 2" x 6"
3" x 3" 3" x 4"
4" x 4"
We keep various moulded timbers in stock. A selection of skirtings & architrives, flooring, Dado rail, shiplap, Bannister handrails and matchboarding. Detailed are the sizes of most things we keep, all again sold by the metre, and, unless otherwise stated, can be brought in anything from a foot to 5m lengths. So please call in to see all our ranges and profiles
Pine Skirtings & architraves
2" Chamfered Arch. 3" Torus arch.
3" Ogee arch. 3" Chamfered skirting
4" camfered skirting 5" Torus / Ogee skirting
7" Torus / Ogee skirting
Primed MDF Mouldings - Available in 2.2m and 4.4m lengths only
2" and 3" Chamfered and Pencil round architrave
3" Ogee, Torus, Shadow groove and Ovolo architrave
4", 5" and 6" Chamfered skirting
4", 5" and 6" pencil round skirting
5" and 7" Torus, Ogee and Ovolo skirting
6" Shadow groove skirting
Flooring
22 x 125 T&G Flooring 25 x 150mm T&G Flooring
we also keep 18mm and 22mm moisture resistant chipboard flooring sheets. These are available in 8' x 2' sheets.
Matchboardings
13 x 100mm PTGV matchboarding - 2.4m lengths
19 x 125 PTGV matchboarding
25 x 125 PTGV Tanalised matchboarding - 2.25m, 2.7, 4.5m and 5.4m lengths
Handrails
Mopstick handrail (3.9m lengths only)
Windowboards
25mm x 169mm primed MDF silboard
25mm x 219mm primed MDF silboard
25mm x 244mm primed MDF silboard
25mm x 294mm primed MDF silboard
All of the primed MDF silboards above come in 0.9m, 1.8m and 3.6m lengths
250mm Polyboard (2.5m & 5m lengths only)
Misc.
19mm x 125mm Shiplap
16.7mm x 125 rebated & treated shiplap - 4.5m lengths
Treated loglap
25 x 125 T&G treated loglap - 2.4m, 4.5m and 5.4m lengths
Our Sawn carcassing and CLS (studding timber) is sold in set lengths as listed below. Discounts are available based on quantities, and all timber is kept in dry sheds to maintain its quality. Sizes available are :-
1" x 2" treated 2.4m & 4.8m
1" x 4" treated 2.4m & 4.8m
1" x 6" treated 1.8m, 2.4m & 4.8m
2" x 2" treated 2.4m & 4.8m
2" x 3" treated 2.4m, 3.0m & 4.8m
2" x 4" 1.8m, 2.4m, 3.6m & 4.8m
2" x 4" treated 1.8m, 2.4m, 3.6m & 4.8m
2" x 6" 2.4m & 4.8m
2" x 6" treated 1.8m, 2.4m, 3.6m & 4.8m
2" x 8" treated 2.4m & 4.8m
3" x 6" 2.4m, 3.6m & 4.8m
3" x 8" treated 2.4m & 4.8m
2" x 3" CLS 2.4m
2" x 4" CLS 2.4m
We keep a range of sheet materials in stock. Hardwood ply, strutural elliottis ply, MDF, OSB3, P5 chipboard flooring and more. Not just in 8' x 4' sheets either, we also keep half and quarter sheets in most options to eliminate waste and save money. Click the following link to see all the details about our various sheet materials.
BARTON BUILDING SUPPLIES
11 fleetgate
Barton on Humber
North Lincs.
DN18 5PZ
Tel: 01652 633136
E-mail: bartonbuildingsupplies@hotmail.co.uk
Fax: 01652 660412
Mon - 8.00 - 17.00
Tue - 8.00 - 17.00
Wed - 8.00 - 17.00
Thur - 8.00 - 17.00
Fri - 8.00 - 17.00
Sat - 8.00 - 12.00
|
|